Create your online login and get access to trade pricing

Wallmount expander unit. 1 x PSU, 2 x A3232 RJ45, 16 mic/line in, 4 line out. IEC or hard-wired mains. Cascade or redundant cable mode.

16 mic/line in and 8 line out expander I/O unit, providing portable remote I/O connectivity where it’s required.

A 16 mic/line and 4 line out expander unit with Dante Connectivity. The A164D WALL LCD provides fixed local I/O for remote performance areas with S-LCDs for intelligent labelling and visual feedback. All LCD labels are dimmable and can be...

Rack mount kit for A168, 4U.

16 mic/line in and 8 line out I/O Expander, using A3232 network protocol and providing additional I/O anywhere on the network. Up to two A168STAGE can be daisy-chained via A3232, or the second A3232 port can be used to create redundant network.

1U Rack Mount Kit for GPIO and/or ASTAR. Holds 2 units.

This card offers both the SD-Range and the S-Series consoles up to 64 channels of automatic microphone mixing which can be used in any console input channel. When dealing with live sound scenarios that involve several live microphones with...

The ASTAR is a remote audio networking hub that can be connected to a DiGiCo 4REA4 system fitted with ASTAR connectors. It provides four A3232 ports, each carrying 32x32 channels of 96kHz audio, that can be used to connect to 4REA4 expanders. Up...

The 4REA4 Customised DSP Engine has 8×8 on board GPIO ports. You can extend the number of GPIO’s anywhere in the installation using the network-based A88GPIO.

Multi-layer programmable remote control panel that can be configured as a single-zone or multi-zone remote control, or compact mixing interface. Eight 100mm motorised faders designed specifically for accurate fader based control. Ideal if you...

The simplest 4REA4 controller features one programmable, rotary encoder with TFT Display to offer preset, volume and source management. Easy to use, single gang wall panel featuring a programmable rotary encoder with TFT Display. Connects to...

The simplest 4REA4 controller features one programmable, rotary encoder with TFT Display to offer preset, volume and source management. Easy to use, single gang wall panel featuring a programmable rotary encoder with TFT Display. Connects to...

This card allows Optocore audio over HMA connectors. Connecting the DMI-OPTO to the DiGiCo OrangeBox (a simple format converter solution), allows the OrangeBox to be added to an Optocore loop and interfaced with another DMI card, giving up to...

This card allows S-Series Consoles to connect to the A168 STAGE Stage Rack. Each Ethercon port supports up to 32 I/O, for a total channel count of 64 I/O. With the introduction of the DiGiCo 4REA4 came the new DiGiCo A3232 protocol, allowing...

This card will provide 56 Input and 56 output channels at 48kHz with Primary and Secondary (backup) optical connections. Calrec’s Hydra 2 protocol allows audio to be sent within a Calrec system. The DMI-Hydra allows DiGiCo products to be...