Create your online login and get access to trade pricing

This card offers both the SD-Range and the S-Series consoles up to 64 channels of automatic microphone mixing which can be used in any console input channel. When dealing with live sound scenarios that involve several live microphones with...

The ASTAR is a remote audio networking hub that can be connected to a DiGiCo 4REA4 system fitted with ASTAR connectors. It provides four A3232 ports, each carrying 32x32 channels of 96kHz audio, that can be used to connect to 4REA4 expanders. Up...

The 4REA4 Customised DSP Engine has 8×8 on board GPIO ports. You can extend the number of GPIO’s anywhere in the installation using the network-based A88GPIO.

Multi-layer programmable remote control panel that can be configured as a single-zone or multi-zone remote control, or compact mixing interface. Eight 100mm motorised faders designed specifically for accurate fader based control. Ideal if you...

The simplest 4REA4 controller features one programmable, rotary encoder with TFT Display to offer preset, volume and source management. Easy to use, single gang wall panel featuring a programmable rotary encoder with TFT Display. Connects to...

The simplest 4REA4 controller features one programmable, rotary encoder with TFT Display to offer preset, volume and source management. Easy to use, single gang wall panel featuring a programmable rotary encoder with TFT Display. Connects to...

This card allows Optocore audio over HMA connectors. Connecting the DMI-OPTO to the DiGiCo OrangeBox (a simple format converter solution), allows the OrangeBox to be added to an Optocore loop and interfaced with another DMI card, giving up to...

This card allows S-Series Consoles to connect to the A168 STAGE Stage Rack. Each Ethercon port supports up to 32 I/O, for a total channel count of 64 I/O. With the introduction of the DiGiCo 4REA4 came the new DiGiCo A3232 protocol, allowing...

This card will provide 56 Input and 56 output channels at 48kHz with Primary and Secondary (backup) optical connections. Calrec’s Hydra 2 protocol allows audio to be sent within a Calrec system. The DMI-Hydra allows DiGiCo products to be...

This card offers a 40 output interface to Allen & Heath ME-1 or ME-500 Personal Mixers. Multiple personal Mixers can be connected to the DMI ME via the ME-U Hub. At smaller scale gigs where it is not possible to have a monitoring engineer,...

This card will provide 64 input and 64 output channels at 48kHz or 96kHz to the SoundGrid Network with 2 Ethercon ports. Waves SoundGrid network is a flexible protocol that allows audio to be passed over ethernet. This card provides 64 input...

This card provides 16 output channels at 48kHz (with SRC) and Supports Aviom's proprietary A-Net Pro16 protocol. It has 1 Ethercon connection and faceplate DIP switched for Stereo output selection. The DMI-AVIOM allows easy integration with...

This card provides 64 inputs and 64 outputs to the Dante network at both 48kHz and 96kHz. Audio over IP is becoming more and more sought after, due to the fact that it works over a standard IP network and can be sent over pre-installed...

This card provides 16 analogue outputs on 2 x 25 way “D” connectors DAC card is line level only. Maximum output level +22dBu (Digital Full Scale). As a simple solution to expanding the local i/o of the S-Series, DiGiCo offer the DMI-ADC and the...

This card provides 16 analogue inputs on 2 x 25 way “D” connectors. The ADC card is a line card only. There is no microphone amplifier or phantom power available. There is no gain control function for these inputs (only digital trim). Maximum...